HP 100B - All-in-One PC Primeros pasos - Página 17
Navegue en línea o descargue pdf Primeros pasos para Escritorio HP 100B - All-in-One PC. HP 100B - All-in-One PC 19 páginas. Hp 100b all-in one pc illustrated parts & service map
También para HP 100B - All-in-One PC: Especificaciones (4 páginas), Lista de apoyo (34 páginas), Mapa ilustrado de piezas y servicios (3 páginas), Quickspecs (11 páginas)
![HP 100B - All-in-One PC Primeros pasos](/uploads/products/server2/3430716/3430716.jpg)
3.
If the computer works, click the Start button, and then click Shut Down. Or, if the computer is
not responding, press and hold the Power button for approximately 5 seconds, or until the
computer turns off.
4.
Disconnect all peripheral devices from the computer except the monitor, keyboard, and mouse.
5.
Press the Power button to turn on the computer. If you are using a recovery DVD, the computer
will automatically run Recovery Manager from the disc. Skip to step 7.
6.
If you are running System Recovery from a USB flash drive, press the
is powering on to bring up the boot menu. Use the arrow keys to select the USB device and
press
Enter
7.
If the Recovery Manager asks if you want to run System Recovery from Media or Hard Drive,
select Media. On the Welcome screen, under I need help immediately, click Factory Reset.
8.
If you are prompted to back up your files, and you have not done so, select Back up your files
first (recommended), and then click Next. Otherwise, select Recover without backing up
your files, and then click Next.
9.
If you are prompted to insert the next recovery disc, do so.
10.
When the Recovery Manager is finished, remove all recovery discs or the recovery USB flash
drive from the system.
11.
Click Finish to restart the computer.
Recovery Media
You should create a set of recovery discs or a recovery USB flash drive from the recovery image
stored on your hard disk drive. This image contains the operating system and software program files
that were originally installed on your computer at the factory. You can create only one set of recovery
discs, or one recovery USB flash drive, for your computer. The recovery discs, or the recovery USB
flash drive, can be used only with this computer. Store the recovery discs, or the recovery USB flash
drive, in a safe place.
NOTE:
Some features might not be available on systems that are shipped without a version of
Microsoft Windows.
Choosing Recovery Media
●
To create recovery discs, your computer must have a DVD writer, and you must use only high-
quality blank DVD+R or DVD-R discs.
NOTE:
or DVD-R DL discs to create recovery discs.
●
You have the option of creating a recovery USB flash drive instead, using a high-quality blank
USB drive.
●
If you are creating recovery discs, be sure to use high-quality discs. It is normal for discs to be
rejected if they are not defect-free. You will be prompted to insert a new blank disc to try again.
●
The number of discs in the recovery-disc set depends on your computer model (typically 3–6
DVD discs). The Recovery Media Creation program tells you the specific number of blank discs
needed to make the set. If you are using a USB flash drive, the program will tell you the size of
the drive required to store all the data (minimum of 8 GB).
ENWW
to boot from that device.
You cannot use CDs or DVD+RW, DVD-RW, DVD+RW DL, DVD-RW DL, DVD+R DL,
Esc
key as the computer
Restore and Recovery
11