HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Instalación del controlador - Página 5

Navegue en línea o descargue pdf Instalación del controlador para Escritorio HP 2530p - EliteBook - Core 2 Duo 2.13 GHz. HP 2530p - EliteBook - Core 2 Duo 2.13 GHz 20 páginas. Notebook pc
También para HP 2530p - EliteBook - Core 2 Duo 2.13 GHz: Especificaciones (36 páginas), Manual del producto (16 páginas), Manual del usuario (15 páginas), Manual de la red (16 páginas), Especificaciones (2 páginas), Manual del usuario (27 páginas), Manual de instalación (19 páginas), Visión general (16 páginas), Manuallines (12 páginas), Manual de instalación del software (8 páginas), Manuallines (6 páginas), Manual de instalación y configuración (18 páginas), Manual (20 páginas), Manuallines (7 páginas), Manual del usuario (31 páginas), Manual del usuario (46 páginas), Manual del usuario (44 páginas), Manual del usuario (42 páginas), Especificaciones (45 páginas), Manual del usuario (30 páginas), Manual del usuario (24 páginas), Quickspecs (46 páginas)

Imprimir página
HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Instalación del controlador

Adding SATA drivers to RIS Installation Points

Where these guidelines are applicable

IMPORTANT:
Follow the installation instructions in the order provided. Failure to
complete these steps in the proper order can result in an unsuccessful or
unstable installation.
This section provides guidelines for customers who need to add SATA support to a Remote Installation
Service distribution point.

Steps to add SATA drivers to the distribution point

1) Download and save the "Intel Matrix Storage Manager" softpaq that is available for your
platform at www.hp.com.
2) Unpack all the files from the SoftPaq. Unpacking a Softpaq file uses this command line:
Sp#####.exe -e -f<path> -s
•
•
Where
SP####.exe is the Softpaq to unpack.
o
-e is a run time switch that overrides installation of the component inside the
o
softpaq.
-f<Path> is a run time switch that overrides the default path set at build time.
o
-s instructs the package to unpack in silent mode skipping the welcome,
o
license and directory screens.
Example: C:\tmp\sp99999.exe -e -fc:\sp99999 -s
•
This will unpack the files needed to c:\sp99999.
•
3) Browse to the location of the Intel storage drivers on your system. Using the example above
that would be c:\sp99999\Winall\Driver (for XP32) or c:\sp99999\Winall\Driver64 (for
XP64). Copy the files in that directory to removable media (i.e. floppy disk, usbkey).
a. iaahci.cat
b. iaahci.inf
c. iastor.cat
d. iastor.inf
e. iastor.sys
f.
txtsetup.oem
4) Copy all the files above to the following path on the distribution point (on the RIS server):
RemoteInstall\Setup\<Language>\Images\<Dir_name>\i386
5) Also copy the same files (from step 3, above) to
RemoteInstall\Setup\<Language>\Images\<Dir_name>\$oem$\$1\drivers\s
ata
Page 5