Miele T 659 C Manual de instrucciones - Página 33

Navegue en línea o descargue pdf Manual de instrucciones para Secadora Miele T 659 C. Miele T 659 C 40 páginas. Novotronic for condenser tumble dryer

Imprimir página

Fitting the plinth facia

– The appliance plinth below the door

can be concealed using a plinth

facia.

– The height and return of the applian-

ce plinth cannot be altered.

– A taller plinth facia can only be instal-

led if the overall niche height is hig-

her.

Plinth height

Niche height

100 mm

(standard)

150 mm

200 mm

A plinth facia (60 cm long) can be orde-

red from your kitchen dealer or manu-

facturer.

A cut-out must be made in the

plinth facia around the ventilation

slots otherwise the air flow to the

appliance will be blocked and the

machine will not work.

820 mm

–

870 mm

a spacer

frame is

required

920 mm

2 spacer

frames are

required

Fitting the plinth facia:

Place the small template supplied on

the back of the upper edge of the

plinth facia and fasten with sticky

tape.

Cut out the plinth facia according to

the template.

Cover the cut surface with the strip

supplied.

Stick the velcro fastener supplied to

the appliance plinth.

For this the following procedure is re-

commended:

Press the two halves of the velcro fa-

stener together lengthwise.

Cut into 2 or 3 pieces.

Peel off the protective backing from

one half of the velcro fastener

pieces.

Stick the pieces along the appliance

plinth, at the left and right hand edge

and in the middle. Press firmly into

place.

Peel off the remaining protective

backing strips.

Press the plinth facia firmly onto the

sticky surface of the velcro.

Installation