HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Manual de instalación - Página 8

Navegue en línea o descargue pdf Manual de instalación para Escritorio HP 6930p - EliteBook - Core 2 Duo 2.8 GHz. HP 6930p - EliteBook - Core 2 Duo 2.8 GHz 15 páginas. Notebook tour
También para HP 6930p - EliteBook - Core 2 Duo 2.8 GHz: Especificaciones (45 páginas), Manual del producto (16 páginas), Manual del usuario (15 páginas), Actualización de software (12 páginas), Manual del usuario (17 páginas), Manual de la red (16 páginas), Manual del usuario (25 páginas), Manual del usuario (27 páginas), Visión general (16 páginas), Manual de instalación del software (8 páginas), Manual de instalación y configuración (18 páginas), Manual del usuario (14 páginas), Manual del usuario (41 páginas), Especificaciones (48 páginas), Manual del usuario (32 páginas), Manual del usuario (27 páginas)

Imprimir página
HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Manual de instalación
2

Using Computer Setup

Navigating and selecting in Computer Setup

The information and settings in Computer Setup are accessed from the File, Security, Diagnostics, and
System Configuration menus.
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
Because Computer Setup is not Windows-based, it does not support the TouchPad. Navigation
and selection are by keystroke:
●
To choose a menu or a menu item, use the arrow keys.
●
To select an item, press enter.
●
To close open dialog boxes and return to the main Computer Setup screen, press esc.
●
To view navigation information, press f1.
●
To change the language, press f2.
2.
Select the File, Security, Diagnostics, or System Configuration menu.
3.
To exit Computer Setup, choose one of the following methods:
●
To exit Computer Setup without saving your preferences, use the arrow keys to select File >
Ignore Changes and Exit. Then follow the instructions on the screen.
●
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
2
Chapter 2 Using Computer Setup
f10
while the
ENWW