HP 8530w - EliteBook Mobile Workstation Manual de instalación y configuración - Página 12

Navegue en línea o descargue pdf Manual de instalación y configuración para Escritorio HP 8530w - EliteBook Mobile Workstation. HP 8530w - EliteBook Mobile Workstation 18 páginas. Hp elitebook mobile workstation
También para HP 8530w - EliteBook Mobile Workstation: Folleto y especificaciones (8 páginas), Quickspecs (36 páginas), Manual del usuario (15 páginas), Folleto y especificaciones (4 páginas), Manual de la red (16 páginas), Especificaciones (4 páginas), Manual de accesorios (2 páginas), Folleto y especificaciones (6 páginas), Manual del usuario (27 páginas), Manual de instalación (19 páginas), Visión general (16 páginas), Manuallines (12 páginas), Manual de instalación del software (8 páginas), Manuallines (6 páginas), Manual (20 páginas), Manuallines (7 páginas), Manual del usuario (28 páginas), Quickspecs (47 páginas)

Recommended Setting

i. Select N.

If network is disabled, then all remote AMT capabilities are disabled and

TCP/IP settings will not be necessary.

This option is a toggle, the next time it is accessed the opposite setting is

prompted.

a. DHCP Disable

Default Setting

Recommended Setting

i. Select N.

For the purpose of this whitepaper, DHCP is enabled.

17) Go into Provisioning Server.

a. Enter Provisioning Server IP

Default Setting

Recommended Setting

b. Enter Port

Default Setting

Recommended Setting

This option is used in Enterprise mode when an Intel AMT Setup and Configuration

(Provisioning) Server is available. It points to the IP address of the S&CS.

If the IP and port is left as the default, the ME will look for "ProvisionServer" on DNS at port

9971.

Some ISV's may require additional settings, such as the SC&S port number and SC&S IP

address. Contact your Management Console ISV for more details.

18) Check Provision Model.

a. Change to Small Business

Default Setting

Recommended Setting

i. Select N.

b. Return to previous menu.

19) For AMT 2.x, go into Set PID and PPS. For AMT 4.x, go to Setup and Configuration => TLS

PSK => Set PID and PPS

Default Setting

Recommended Setting

This option is for Provisioning ID (PID) and Provisioning Passphrase (PPS) entry. PIDs are 8

characters and PPS are 32 characters. There are dashes between every set of four characters

: Network Interface Enabled

: DHCP Enabled

: User Dependent

: 0.0.0.0

: Network Dependent

: 9971

: S&CS Dependent

: Enterprise

: None

: System Dependent