Miele HS05 Manual de instrucciones - Página 18

Navegue en línea o descargue pdf Manual de instrucciones para Aspiradora Miele HS05. Miele HS05 27 páginas. Vacuum cleaner

Imprimir página

Replacing one type of exhaust filter

with another (dia. 27)

Depending on model, your vacuum

cleaner will be fitted as standard with

one of the following exhaust filters:

a Air Clean

b Active Air Clean SF-AAC 30 (black)

c Active HEPA SF-AH 30 (blue)

Please note:

1. If you wish to replace the Air Clean

filter a with an Active Air Clean filter b or

an Active HEPA filter c, it is essential

that you remove the filter grille before

fitting the new type of filter.

2. If you wish to replace exhaust filter b

or c with exhaust filter a, then it is

essential that you also fit the filter

grille*.

* Filter grille - see "Optional

accessories".

Do not use more than one exhaust

filter at a time.

When to change the thread lifters

The thread lifters on the suction inlet of

the floorhead can be replaced.

Check them from time to time and

replace them if the pile has worn down.

How to replace the thread lifters (dia.

33)

^ Use a suitable screwdriver to remove

the thread lifters from the slots. There

are two grooves to help you.

^ Fit new thread lifters.

How to replace the thread lifters on

the FiberTeQ floorhead (dia. 34)

^ Use a suitable screwdriver to remove

the thread lifters from the slots.

^ Fit new thread lifters.

Cleaning the roller on the floorhead

(dia. 35)

(Not necessary for the FiberTeQ

floorhead)

a Release the bearing (with bayonet

fitting) using a coin.

b Press the bearing out, and remove it.

c Take out the roller.

^ Remove any threads and hair,

replace the roller and refit the

bearing.

Replacement parts are available from

your Miele retailer or from Miele (see

back cover for contact details).

Cleaning and care

Warning: Always disconnect the

vacuum cleaner from the electrical

supply for maintenance work and for

cleaning. Switch off at the wall

socket and unplug it.

Vacuum cleaner and accessories

External surfaces of the vacuum

cleaner and of the accessories can be

cleaned with a dry or a slightly damp

cloth, or with a proprietary cleaner

suitable for plastic.