Miele S 140 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Aspiradora Miele S 140. Miele S 140 36 páginas. Compact
También para Miele S 140: Manual de instrucciones (44 páginas), Manual de instrucciones (44 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (40 páginas), Manual de instrucciones (44 páginas)

Imprimir página

It important to switch the vacuum

cleaner off before changing over

accessories and floor heads, especially

a Turbo- or Electrobrush.

To avoid the risk of damage, do not

use the vacuum cleaner without the

dustbag, dust compartment filter and

exhaust filter in place.

Do not vacuum up liquids or damp

dirt. This will cause major faults

and could seriously impair the

functioning and electrical safety of the

appliance. Wait until any freshly

cleaned or shampooed carpets or floor

coverings are completely dry before

attempting to vacuum.

Do not vacuum up anything which

has been burning or is still glowing

e.g. cigarettes, ashes or coal, whether

glowing or apparently extinguished.

The cleaner might catch fire.

Do not vacuum toner dust. Toner,

such as that used in printers and

photocopiers can conduct electricity.

The filter system in the vacuum cleaner

may not filter it completely and so the

toner could be blown back into the

atmosphere by the fan.

Do not vacuum up any inflammable

or combustible liquids or gases

and do not vacuum in areas where

such substances are stored. The

cleaner might explode.

Do not vacuum up items which are

heavy, hard or have sharp edges.

They could cause a blockage and

damage the appliance.

Floor attachments, accessories

and tubes must not be used at

head level to avoid the risk of injury,

e.g. to eyes and ears. Danger of injury.

Do not pull or carry the appliance

by the cable. When disconnecting

from the mains socket pull by the plug

and not by the cable.

- Keep the cable away from sharp

edges and do not let it be squashed,

for example, under a door.

- Avoid running the vacuum cleaner

over the cable.

A damaged cable, plug or socket is a

safety hazard. The appliance must not

be used if any of these have been

damaged.

Monitor the change dustbag

indicator and change the dustbag

if necessary. Check the exhaust and

dust compartment filters at the same

time and change them too if necessary.

A full bag or blocked filter will hamper

the suction power of the cleaner and

can cause it to get so hot that the

temperature limiter switches the cleaner

off automatically, see "Problem solving

guide".