Miele 7080 850 Instrucciones de funcionamiento e instalación - Página 13

Navegue en línea o descargue pdf Instrucciones de funcionamiento e instalación para Frigorífico Miele 7080 850. Miele 7080 850 14 páginas.

Installing

Check correct position and operation of the kitchen unit

door

Run the mains cable so that the appliance can be con-

nected to the power supply when installed

Cut sealing strip

to the height of the niche and fit it over

the gap between the appliance and the kitchen unit on the

same side as the handle.

Press strip a into the gap.

Strip

with adhesive strip: before pushing into the niche, re-

move the protective backing and affix to the side panel of the

kitchen unit.

Secure retaining bracket® to the appliance using the en-

closed screws.

Push appliance into the niche, leaving a gap of app. 4 mm

at the handle side (fig.

A).

Align the top and bottom front edges of support brackets®

with the front edge of the kitchen unit (not with the retaining

plates!)

(Detail X). Allow retaining bracket® to make contact with the

side panel (Detail Y).

Push the appliance against the side panel of the kitchen

unit (sealing strip compressed) and secure it at the top and

bottom with screws®. On the handle side, screw the appli-

ance to the side panel with the chipboard screw at the retain-

ing bracket®.

Break the stop off the retaining bracket and clip on cover

piece

install door connecting element

according to handle

height and door arrangement. Open the door fully, insert

connecting rail® and screw it to the kitchen unit door, allow-

~ing

for the thickness of the unit door

d (fig. B).

Adjust the connecting element so that the handle side of the

kitchen unit door does not make contact with the unit body

when closed (appl. 1 mm gap).

Fit a second connecting element if necessary.

Plug the exposed holes in the appliance door.

Fig. A

Fig. 8