Miele F 1801 SF Instrucciones de uso e instalación - Página 15
Navegue en línea o descargue pdf Instrucciones de uso e instalación para Frigorífico Miele F 1801 SF. Miele F 1801 SF 26 páginas. Miele f1811sf / f1801sf freezer - product and cut-out dimensions
También para Miele F 1801 SF: Manual de instrucciones de instalación (24 páginas), Manual de dimensiones (3 páginas), Dimensiones del producto (3 páginas)
![Miele F 1801 SF Instrucciones de uso e instalación](/uploads/products/server2/3441410/3441410.png)
Installing the appliance
Securing an alternative anti-tip
device
If the anti-tip brackets cannot be
attached securely, an alternative
anti-tip device can be used.
Ensure that there is no "give" between
the appliance and the anti-tip device.
If possible, always screw the
wooden beam to existing studs.
^ Cut a wooden beam
(cross section min. 29 ½" x 39
[75 cm x 100 cm]) to the required
length.
The length is equal to the width of the
installation niche.
– If the installation niche is deeper than
the appliance, select a beam with a
larger cross section, or attach two
beams.
56
– The beam must cover the appliance
by at least 2" (50.8 mm).
^ Mark the installation height (lower
edge of the beam) on the rear wall of
the niche.
^ Select screws according to the
thickness of the wooden beam.
Example: 3 ½" screw for 2x4 beam.
^ Determine the number of screws
based on the cavity width, to ensure
that the beam will be attached
securely.
^ Locate wall studs near the rear wall
of the cavity and mark drill holes in
the beam.
^ Pre-drill the wooden beam.
^ Attach the wooden beam to the rear
wall of the niche.
If a side-by-side installation is
desired, connect the two appliances
together. See the Installation Manual
included with the "Merging Kit".
Now prepare the water connection from
the appliance to the main supply line
(see "Plumbing").
3
/
"
8