Miele K 12421 SD Manual de funcionamiento e instalación - Página 38

Navegue en línea o descargue pdf Manual de funcionamiento e instalación para Frigorífico Miele K 12421 SD. Miele K 12421 SD 48 páginas. Refrigerator with dynamic cooling

Imprimir página

Changing the door hinging

The appliance is supplied right-hand

hinged. If left-hand door hinging is

required, follow the instructions below.

You will need the following tools:

– A Torx

15 and a Torx

screwdriver,

– a flat-bladed screwdriver,

– a spanner (supplied).

Two people are needed for

changing the door hinging.

Removing the door handle

^ Pull door handle a towards you. Side

section b slides back.

^ Pull side section b firmly back out of

the guides on the mounting plate.

^ Undo the 4 screws (Torx

mounting plate, and remove the

handle.

^ Remove the cover caps from the

opposite side, and fit them into the

empty holes.

15) in the

The hinge parts (hinge plate and

hinge pin) must be screwed

sufficiently tightly as otherwise the

appliance door could fall off. Danger

of injury. Also the door may not

close fully, which would prevent the

appliance from cooling down

properly. Take care to secure the

hinge plate and pin tightly. Check

all screws and tighten them if

necessary.

Changing over the door

Caution. The door is not secure as

soon as the hinge pin is removed.

^ With the help of another person, tip

the appliance back slightly.

^ Unscrew retaining screw c on

bottom right hinge plate d.