Miele CS 1028 Instrucciones de conversión - Página 17

Navegue en línea o descargue pdf Instrucciones de conversión para Placa de cocción Miele CS 1028. Miele CS 1028 40 páginas. Combiset
También para Miele CS 1028: Instrucciones de uso e instalación (44 páginas), Instrucciones de uso e instalación (44 páginas), Instrucciones de uso e instalación (44 páginas), Instrucciones de uso e instalación (44 páginas)

Check the intake air

e Lock screw

f Air sleeve

Gap X must measure:

– 1/4" (6 mm) for natural gas

– 3/16" (5 mm) for LP (propane) gas

^ To adjust the gap, loosen the lock

screw and slide the air sleeve in or

out as necessary.

^ Tighten the lock screw.

^ Use sealant to secure the jets and

prevent loosening.

^ Reassemble the cooktop in reverse

order.

The flame must not go out on the lowest

setting, or when the control is turned

quickly from a high to a low setting.

On the highest setting the flame must

have a distinctive and visible core.

Converting CS 1028

Changing the needle valve

^ Using a small screwdriver, unscrew

needle valve g and remove with a

pair of needle nose pliers.

^ Insert the new valve and screw in

place.

^ Use sealant to secure the jets and

prevent loosening.

Check all fittings for gas leaks

before reassembling the cooktop.