Miele GAS COMBISET CS 1012 Dimensiones del producto - Página 4

Navegue en línea o descargue pdf Dimensiones del producto para Placa de cocción Miele GAS COMBISET CS 1012. Miele GAS COMBISET CS 1012 4 páginas. Double gas combiset
También para Miele GAS COMBISET CS 1012: Instrucciones de uso e instalación (44 páginas), Instrucciones de uso e instalación (44 páginas), Instrucciones de conversión (40 páginas)

Product and Cut-out Dimensions

CS 1012 Double Gas CombiSet

Safety distances to back wall

If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out

and the covering, since high temperatures can damage these materials.

If the covering is made of a combustible material (such as wood), the distance between the countertop cut-out

and the wall covering must be a minimum of 2" (50 mm)

and the wall covering must be a minimum of 2 (50 mm).

For coverings made of non-combustible materials (such as metal, marble, granite or ceramic tiles) the

minimum safety distance between the countertop cut-out and the wall covering must be 2" (50 mm) minus the

thickness of the covering.

For example: thickness of wall covering 9/16" (15 mm) 2" (50 mm) - 9/16" (15 mm) = minimum safety distance

1 3/8" (35 mm).

Safety distances to surrounding cabinetry

Recommended

The appliance should only be installed as shown in the above illustrations while maintaining the

required safety distances shown. Do not install the appliance between two tall cabinets, this is a

fire hazard.

A distance of at least 2" (50 mm) must be kept between the countertop and the rear wall

because of high temperature radiated.

The minimum distance required from the countertop cut-out to a side wall or tall cabinet right or

left 10" (250 mm) (Location code 1)

Safety distance above the appliance

The minimum safety distance given by the hood manufacturer

must be maintained between the combiset and the hood above

it. See the installation instructions for the hood for these safety

measurements.

If the hood manufacturers instructions are not available or if

flammable objects are installed over the combiset (e.g.

cabinets, utensil rail, etc.), a minimum safety distance of 30"

(760 mm) must be maintained.

Notes

All installations must be done in accordance with local codes.

Drawing is not to scale

1 – Wall frame

2 – Wall covering

x = thickness of the wall covering

3 – Countertop

4 – Countertop cut-out

5 – Minimum safety distance

with flammable materials 2" (50 mm)

with non-flammable materials 2" (50 mm) minus x

Not Recommended

Page 4 of 4

Not Permitted

Specification Sheets OJS 02212012