Miele KM 2012 Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Placa de cocción Miele KM 2012. Miele KM 2012 44 páginas. Gas cooktops
También para Miele KM 2012: Manual de instalación (21 páginas)

Imprimir página

Warning and Safety instructions

Technical safety

Before installation, check the

appliance for visible signs of damage.

Do not install and use a damaged

appliance. A damaged appliance is

dangerous.

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between

the appliance and an effective earthing

system which complies with current

local and national safety regulations. It

is most important that this basic safety

requirement is present and tested

regularly and, where there is any doubt,

the household wiring system should be

inspected by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

Before connecting the appliance to

the mains supply, make sure that the

voltage and frequency details given on

the data plate correspond to the on-site

electricity supply, otherwise the

appliance could be damaged. Consult

a qualified electrician if in any doubt.

The connection to the gas supply

must be carried out by a suitably

qualified and competent person in

accordance with current local and

national safety regulations. If the

appliance is supplied without a plug, or

if the plug is removed, it must be

connected to the mains electricity

supply by a suitably qualified and

competent electrician in strict

accordance with current local and

national safety regulations. The

manufacturer cannot be held liable for

damage caused by incorrect

installation or connection.

For safety reasons, this appliance

may only be used when it has been

built in.

Never open the housing of the

appliance.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user and can

cause operational faults.

Installation, maintenance and

repairs may only be carried out by a

Miele authorised, suitably qualified and

competent person in strict accordance

with current national and local safety

regulations.

Repairs and other work by

unauthorised and unqualified persons

could be dangerous. Miele cannot be

held liable for unauthorised work.