Miele KM 2012 Manual de instrucciones - Página 22

Navegue en línea o descargue pdf Manual de instrucciones para Placa de cocción Miele KM 2012. Miele KM 2012 44 páginas. Gas cooktops
También para Miele KM 2012: Manual de instalación (21 páginas)

Imprimir página

Cleaning and care

Stainless steel

surfaces

Pan support

Control knob

Burner caps

Burner head

PerfectClean

Ignitor

Ignition safety

device

Cleaning

Clean stainless steel surfaces using an Original

Miele all purpose microfibre cloth or with a

solution of warm water and a little washing-up

liquid applied with a soft sponge.

If required, clean the appliance with the rough

side of a sponge and a few drops of the Original

Miele ceramic and stainless steel cooktop

cleaner (see "Optional accessories").

Apply with an even pressure following the

direction of the "grain".

The Original Miele care product for stainless

steel can be used after cleaning to help keep

your appliance looking good (see "Optional

accessories"). Apply sparingly with a soft cloth

following the instructions on the packaging.

Remove the cover. These areas should only be

cleaned with a microfibre cloth or with a solution

of warm water and a little washing-up liquid

applied with a soft sponge.

If necessary, the reverse side of a non-scratching

washing-up sponge can be used.

Control knobs should only be cleaned with a

microfibre cloth or with a solution of warm water

and a little washing-up liquid applied with a soft

sponge.

Burner caps should only be cleaned with a

microfibre cloth or with a solution of warm water

and a little washing-up liquid applied with a soft

sponge.

If necessary, the reverse side of a non-scratching

washing-up sponge can be used.

Burner heads should only be cleaned with a

microfibre cloth or with a solution of warm water

and a little washing-up liquid applied with a soft

sponge.

If necessary, the reverse side of a non-scratching

washing-up sponge can be used.

The ignitor and ignition safety device should be

very carefully wiped clean using a well wrung out

cloth.

Notes

Printed surfaces

(Flame symbols)

The printing can be damaged

if soiling (e.g. food or fluids

that contained salt, olive oil)

are not removed immediately.

Remove any soiling immedi-

ately.

Do not use any stainless steel

cleaner on printed surfaces.

This would rub off the print.

Stubborn soiling should be

soaked first.

Not dishwasher safe.

The surface of the burner

heads is treated with

PerfectClean enamel, which

has very good anti-stick

properties and is easy to

clean.

Not dishwasher safe.

Make sure that the flame slits

are clean and completely dry.

Do not let the ignitor get wet.

If it gets wet, it will not spark.