Miele KM 7684 FL Manual de instalación - Página 7

Navegue en línea o descargue pdf Manual de instalación para Placa de cocción Miele KM 7684 FL. Miele KM 7684 FL 26 páginas.

Installation

Flush-fit installation

Flush-fit installation is only possible in

natural stone (granite, marble), solid

wood and tiled worktops. Certain

models are suitable for building into

glass worktops – please see the

relevant label on the hob. When using

a worktop made from any other

material, please check first with the

worktop manufacturer that it is

suitable for installing a flush-fit hob.

The internal width of the base unit

underneath the appliance must be at

least as wide as the inner worktop cut-

out (see "Installation – Building-in

dimensions – flush fit"), so that the

hob is easily accessible from

underneath after installation and the

bottom half of the casing can be

removed for maintenance. If the

underside of the hob is not freely

accessible after installation, any

sealant used to plug the gaps around

the appliance must be removed to

enable the hob to be lifted out of the

cut-out should this be necessary.

11271190-06

Natural stone worktops

The hob is set directly in the cut-out.

Solid wood worktops, tiled worktops,

glass worktops

The hob is secured inside the cut-out

with wooden battens. The battens must

be provided on site, and are not

supplied with the appliance.

Sealing strip

Dismantling the hob for service

purposes may damage the sealing

strip underneath the edge of the hob.

Always replace the sealing strip

before reinstalling the hob.