ALLNIC AUDIO HA-5000 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Amplificador ALLNIC AUDIO HA-5000. ALLNIC AUDIO HA-5000 7 páginas. Pre-preamplifier (head amplifier)
También para ALLNIC AUDIO HA-5000: Manual del usuario (12 páginas)
Imprimir página
The HA-5000 has been designed and manufactured to work
most synergistically with other Allnic Audio products, for
example the Allnic phono stages and preamplifiers.
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
•
One (1) Allnic HA-5000 Head Amplifier – in natural
aluminum or black finish in accordance with your
order
•
One (1) Allnic HA-5000 Head Amplifier Power
Supply Unit – in natural aluminum or black
finish in accordance with your order
•
One DC umbilical cord
•
One (1) power cord
•
One (1) Owner's Manual
We advise that you keep the box and other packing
materials that your HA-5000 came in. It will be useful if
you sell your HA-5000 or in the unlikely event you need to
ship it for service.
SAFETY
•
Disconnect all cables by pulling the plug, not the
cable.
•
Keep the cables away from any heat source.
•
Keep the unit away from liquids – do not allow any
liquid to enter the interior of the unit.
•
Do not attempt any repairs.
•
Do not remove the cover without specific
authorization from Allnic Audio.
•
See the notes on "Location, Location, Location".
CLEANING
A.
Chassis
Use only a soft, lint-free cloth dampened slightly with water
only (NO cleaning fluids!) to clean the faceplate and chassis.
B.
Connectors
You may use any good quality contact cleaner
recommended for such applications to clean the contacts
from time to time, as you deem appropriate.
INITIAL SET-UP
A.
LOCATION, LOCATION, LOCATION
Like all sensitive audio products, the Allnic Audio HA-
5000 and its power supply should be placed on a solid
stand.
•
DO NOT place the units on carpet or foam.
•
DO NOT subject the units to knocks and shocks as
you move them around. This advice is meant
particularly for those who may want to place the
HA-5000 on some kind of after-market isolation feet
or similar devices. Dropping one side of the HA-
5000/power supply, or the whole unit, is not a good
thing to do.
•
DO NOT place the units near a strong light or heat
source.
•
DO NOT place anything heavy on the units.
•
DO NOT allow rubber or vinyl materials to rest on
the units' chassis for long periods of time. This could
discolour the metal.
•
DO place the units on a shelf or stand that is stable
and not subject to vibration or sudden shock.
•
DO consider using high quality interconnects for
both inputs and outputs. The HA-5000 is a highly
sensitive piece of electronic equipment designed for
neutrality and will output what you put into it.
•
DO try to place the HA-5000 away from major
sources of RFI and EMI; though very well shielded,
the HA-5000 units will function best away from large
power transformers and other sources of such
interference.
B.
INPUTS
In the centre of the four RCA connections on the rear of
the HA-5000's chassis is a screw type connector. This
connector is the ground connection for a ground wire
from a cartridge and/or turntable.
5