Bürkert 8690 Manual de inicio rápido - Página 4

Navegue en línea o descargue pdf Manual de inicio rápido para Controlador Bürkert 8690. Bürkert 8690 13 páginas. Pneumatic

operating conditions
Warning!
Risk of injury if the pneumatic controller overheats.
Heating above the admissible temperature range can en-
danger people, the unit and the environment.
Ensure that the unit is not exposed to direct sunlight or
other heat sources.
Ambient temperature:
Protection class:
english
12
electrical Data
Connections:
1 x M16 x 1.5 cable gland with
screw terminals for cable cross-sections
of 0.14 ... 1.5 mm
SW 22 (clamping range 5 ... 10 mm)
M12 circular plug-in connector 8-pole
Power Supply
Pilot valve:
24 V DC ± 10% residual ripple 10%
Limit switch:
24 V / DC max. 2 A
Proximity switches: 24 V DC max.
100 mA per proximity switch
Power consumption, pilot valve:
english
14
0 to +55°C
IP65 / IP67 to EN 60529
2
1 W
Pneumatic Data
Control medium:
Quality classes to DIN ISO 8573-1
Dust content class 5: max. particle size 40 μm,
max. particle density 10 mg/m
Water content class 3: max. pressure dew point -20°C
or min. 10°C below the lowest
operating temperature
Oil content class 5:
max. 25 mg/m
Temperature range
of compressed air:
-10 to +50 °C
Pressure range:
3 to 7 bar
Air output, pilot valve: 250I
(QNn value by definition upon
pressure drop from 7 to 6 bar
absolute)
Connections:
Hose plug connector
Ø 6mm / 1/4"
on request:
Socket connector G 1/8

elecTrical insTallaTion

Two kinds of connections are used for the electrical contacting
of the Pneumatic Controller; they are described below.
connecting Terminals for cable
Glands
Danger!
Risk of electric shock!
Before reaching into the system, switch off the voltage
and secure to prevent reactivation!
Observe applicable accident prevention and safety regula-
tions for electrical equipment!
Procedure:
Open the housing by turning the transparent cover anti-
clockwise.
Clamp the leads in place (see connection configuration).
3
3
/min (for ventilation)
N
english
english
13
15