ALLNIC AUDIO T-1500 MK2 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Amplificador ALLNIC AUDIO T-1500 MK2. ALLNIC AUDIO T-1500 MK2 13 páginas. 300b set stereo integrated amplifier
Imprimir página
We advise that you keep the boxes and other packing materials that your T-1500 MK2 came in. It will be
useful if you sell your T-1500 MK2 or in the unlikely event you need to ship it for service.
SAFETY
Remove ALL protective cushioning material inside the tube chimneys before operation. The
•
tube chimneys should contain NOTHING except the tubes.
Disconnect the power cord by pulling the plug, not the cable.
•
Do not attempt any repairs. Do not remove the unit's chassis cover without specific
•
authorization from Audiomentors.
Keep the power cord away from heat sources
•
Keep the unit away from liquids – do not allow any liquid to enter the interior of the unit.
•
When the unit is moved from a cold to a warm environment, allow sufficient time for any
•
condensation to evaporate before plugging the T-1500 MK2 into an AC connection.
Do not attempt any repairs.
•
See the notes on "Location, Location, Location".
•
CLEANING
Chassis and glass
A.
Use only a soft, lint-free cloth, dampened slightly with water only (NO cleaning fluids!), to clean the
faceplate, chassis and tube chimneys of the T-1500 MK2.
Connectors
B.
You may use any good quality contact cleaner recommended for such applications to clean the
contacts from time to time, as you deem appropriate.
INITIAL SET-UP
LOCATION, LOCATION, LOCATION
A.
Like all audio products using tubes, the Allnic Audio T- 1500 MK2 needs to be placed on a solid stand in
a location that provides good air circulation around, above and below the stereo amplifier.
DO NOT cover the top of the T-1500 MK2.
•
DO NOT place the unit on carpet or foam.
•
DO NOT subject the unit to knocks and shocks as you move it around. This advice is meant
•
particularly for those who may want to place the T- 1500 MK2 on some kind of after-market
isolation feet or similar devices. Dropping one side of the T- 1500 MK2, or the whole of the unit,
is not a good thing to do.
DO NOT place the unit near a strong light or heat source.
•
DO NOT place anything heavy on the unit.
•
DO NOT allow rubber or vinyl materials to rest on the chassis for long periods of time. This
•
could discolour the metal.
DO place the unit on a shelf or stand that is stable and not subject to vibration or sudden shock.
•
6