DIAL ENGINEERING IUPITER Series Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Cargador de batería DIAL ENGINEERING IUPITER Series. DIAL ENGINEERING IUPITER Series 13 páginas. 24 v/10 a
También para DIAL ENGINEERING IUPITER Series: Manual de instrucciones (17 páginas)

DIAL ENGINEERING IUPITER Series Manual de instrucciones

Technical Data

Common
IEC Protection class
II
Ingress Protection
IP 20
Converter technology
Primary switching converter
Switching frequency
About 125 kHz
Power Factor Correction
Active PFC
Efficiency
≥ 85%
Temperature range
-10 ... 45 °C
It is not recommended to charge batteries
below an ambient temperature of 15 °C or
above 30 °C.
Ventilation
Fan
Input
Nominal voltage range
100 ... 240 V / 50 ... 60 Hz
Max. voltage range
90 ... 264 VAC / 47 ... 63 Hz
Max. input current
4.3 A
at 90 VAC and full-load of 300 W
at the output
Max. power
360 W
Fuse
4 AF
Technical Data
Output
Nominal / max. voltage
Max. output current
Fuse
Current regulation
Voltage regulation
Reverse current with the charger
switched off
Output voltage ripple
Output current ripple
Outputs
Immobilizer Relay
LEDs (for each LED)
Interface
USB
Mechanics
Weight
Dimensions (L x W x H)
24 / 35 VDC
10 ADC @ 30 VDC
15 AF
2 %
1 %
< 1 mA
< 100 mV
< 1% of the output current
Max. 30 VDC / 2 A
Normally-closed
3.3 V / max. 10 mA
USB 2.0, HID Class,
USB Mini B connector
About 1.7 kg
About 186 x 134 x 75 mm