Dial2Open GSM-Micro LD Manual de inicio rápido - Página 6
Navegue en línea o descargue pdf Manual de inicio rápido para Unidad de control Dial2Open GSM-Micro LD. Dial2Open GSM-Micro LD 7 páginas. Gsm remote control unit
Imprimir página
WHL_01_OK
If you have more than 10 digits in your phone number, only use the last
10 digits.
For example, if your phone number was 733446665555 you would use
the command
#PWD121212#WHL12=3446665555
Your phone number would be put in position 12 of the white list.
· To check a number in the white list
If you wanted to check which phone number was in position 01 of the
white list you would send the following command:
#PWD121212#WHL01?
You will receive a confirmation SMS message.
WHL_01_=0781987654
· Deleting Numbers from the white list
To delete the phone number in position 01 of the white list you would
use the following command:
#PWD121212#WHL01D
That number in the white list has now been deleted!
To delete all the numbers on the white list you would use the
command:
#PWD121212#WHL99D
Changing Access mode
The unit can be programmed to allow access to any person who phones
the unit's SIM number. To do this, send the command:
#PWD121212#ACM0
Use the above command with extreme caution!!!!
To allow access to only the authorised users on the white list send the
command:
#PWD121212#ACM2
(The 0 is a zero)