Chroma Color One 100X Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Luminaria Chroma Color One 100X. Chroma Color One 100X 4 páginas.
También para Chroma Color One 100X: Manual de inicio rápido (2 páginas), Manual del usuario (18 páginas)
Imprimir página1. Overview
The new Chroma-Q
homogenized beam. Built with an internal power supply, the fixture operates as a standalone unit
with the wireless IR Remote or controlled via an external DMX console.
The Color One 100X™ is available in 2 models. The IP20 version is fitted with chassis mount
powerCon and XLR 5-Pin connectors. The IP65 version is fitted with trailing leads.
The IR Remote is included in the fixture package.
2. Safety
1. This product is for professional use only. It is NOT intended for domestic or
outdoor use.
2. The bright flash of light during power-up and continuous strobe effect may
Caution
cause epileptic seizure.
3.
This product must be used with safety cable.
3. Cabling and Connection
The Color One 100X™ (IP20 version) is built with chassis mount powerCon connectors for power
input/through and chassis mount XLR 5-pin for DMX input/through.
The Color One 100X™ (IP65 version) is built with trailing leads for power input/through and XLR
5-pin trailing leads for DMX input/through. The chassis is ground bonded.
4. Mounting
The Color One 100X™ is built with a dual yoke system for floor mounting and overhead hanging
applications. Secure the fixture with a safety bond. A provision for the fixing hold is built into the
enclosure.
5. Optics
The Color One 100X™ is built with optical lens that provide a fully homogenized beam angle of
approximately ~18°.
6. Control
The control functions are accessed through the LCD display at the rear with 4 push buttons:
Power-Up Display:
The software version is displayed on power up then proceeds to the Main Menu. The Main Menu
shows the model's name, DMX status and start address, set control mode and number of assigned
DMX channels.
Display Mode:
The LCD display is backlit when you access the menu and turns off when left undisturbed for 5
seconds.
IR Remote:
The remote infrared control unit features control buttons for: On/Off, Dim Up/Down, various colors,
white and 4 effects: Full Color Scroll (Flash), Warm Color Scroll (Strobe), Fade In/Out (Fade),
Cold Color Scroll (Smooth). Set the fixture for IR Remote control by selecting IR Remote in the
menu No DMX Present. Point the IR Remote towards the fixture.
Control Menu:
To navigate the Control Menu options from the Main Menu,
•
Use the Up and Down arrows to navigate the control menu options
•
Press the Back arrow (Enter) to select a control menu option
•
Press the Back arrow (Enter) to save the setting and display shows Done
•
Press Exit to return to the Main Menu
TM
Color One 100X
QSG V2.1
®
Color One 100X™ is a LED Par fixture with RGBA LEDs and a fully
Back Arrow
Up Arrow
Down Arrow
Exit
(Enter) Stores the menu choice
Increases (+) the mode level or value
Decreases (-) the mode level or value
Back to the previous menu
QSG P/N: 638-0701