Alloy AS1000 Series Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Interruptor Alloy AS1000 Series. Alloy AS1000 Series 16 páginas. Fast ethernet and gigabit ethernet poe+ unmanaged switches

Imprimir página

7. Network Connection

These switches are designed to be connected to (AS1000 Series - 10, 100 or 1000Mbps) or

(AS2000 Series - 10 or 100Mbps) network cards in PCs and Servers, as well as to other

switches and hubs.

Cabling Guidelines

The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so you

can use standard straight-through twisted-pair cables to connect to any other network

device (PCs, servers, switches, routers, or hubs).

Each device requires an unshielded twisted-pair (UTP) cable with RJ-45 connectors at both

ends. Use Category 5 or better for 100BASE-TX connections, and Category 3 or better for

10BASE-T connections.

Connecting To Pcs, Servers, Hubs and Switches

1. Attach one end of a twisted-pair cable segment to the device's RJ-45 connector.

2. Attach the other end of the cable segment to an available port on the switch.

Make sure each twisted pair cable does not exceed 100 meters (328 ft) in length.

3. As each connection is made, the relevant port LED (on the switch) corresponding to

each port will turn on green to indicate that the connection is valid.

Fig. 5.2 Front panel of the AS2008-P

Fig. 5.3 Front panel of the AS2024-P

AS1000 & AS2000 User Manual