Alloy LED AL-60-03-0001 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Interruptor Alloy LED AL-60-03-0001. Alloy LED AL-60-03-0001 2 páginas. Remote control dimmer switch

Imprimir página

Remote Control Dimmer Switch

AL-60-03-0001

Dimensions

2.17 in.

Operation

Brightness Wheel

Choose a Zone number(s), for example 1 and 3, then touch the Brightness wheel to choose the desired brightness.

Brightness Up & Down Button

Short or long press the Brightness buttons to increase or decrease the brightness. The dimming direction will change each time the switch

is pressed. For example, the first long press increases the brightness, and the next long press dims down.

Brightness Button

Select a Zone (1, 2, 3, or 4). Press the 25%, 50%, 75% or 100% Brightness button for the corresponding brightness amount.

Save/Recall Button

1. Save brightness level: select a Zone (1, 2, 3, or 4), then adjust the brightness. Long press a Save button (1, 2, 3, or 4) for 2-3 seconds.

The LED lights will flash to indicate the level has been successfully saved.

2. To recall: select the zone to recall by pressing a Zone button (1, 2, 3, or 4), then short press one of the Save buttons (S1, S2, S3).

page 1 of 2

0.67 in.

www.AlloyLED.com / support

Specifications subject to change without notice.

This Wireless Remote Control and Wireless Receiver (AL-60-03-0004

– sold separately) work together to provide mode, color, brightness,

and zone control for both Radialux

The controller can operate up to four independent zones, so you can

have different color-changing effects in different rooms or parts of a

space. The remote can save up to three custom colors or modes. A

touch wheel allows for direct visual selection of colors.

• Operation Voltage: 4.5V DC

• Zones: 4

• Signal: WiFi / RF

• Location: Dry (IP20)

• Compatible Receiver: Wireless Receiver (AL-60-03-0004)

Keypad Layout

AlloyLED.com / 800.910.LEDS (5337)

RGB and RGB-W tape lights.

v2.2