DiamaPro Systems SVX3-A Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Aspiradora DiamaPro Systems SVX3-A. DiamaPro Systems SVX3-A 13 páginas. Industrial vacuum
También para DiamaPro Systems SVX3-A: Manual del usuario (14 páginas)
Imprimir página
14. TROUBLESHOOTING
You can thus solve any problem that may occur.
Motors do not start.
u No electrical voltage. u Check cables, plugs and socket.
Suction capacity decreases slowly.
u Filter, nozzle, suction hose or suction pipe may be blocked. u Check, clean accessories. Clean filter.
Dust comes out during the vacuuming.
u Filter has not been fastened correctly or is defective. u Check to see if filter is sitting properly; replace if required.
15. COLLECTION BAG USE
The dust and the particles are collected in a bag placed in the container under the hopper.
The Infinity Bag system consists in a plastic tubular from which are obtained 20/30 bags of different weights and dimensions.
Once finished or damaged, the tubular must be replaced by a new refill.
The operations below described must be carried out when machine is turned off.
1 - Close the bag with two
distanced bands.
16. BAG REPLACEMENT
1- Cut the Infinity Bag in
2- Pull and rotate the re-
order to let it open.
taining pins of the Infinity
bag container in order to
unfasten them.
6- Keep the inner part
7- Pull the outer part of
of the bag inside the
the bag to create a new
container and pull it up
one.
to the lower edge.
2 - Cut the strip between the
two bands.
3- Remove the Infinity Bag
container and any waste.
8- Insert the container with
the Infinity Bag.
4- Insert the new Infinity Bag
with the inner part facing
upwards.
9- Pull and rotate the retaining
pins and insert them into their
seats.
3 - Pull the Infinity Bag end to
make a new bag.
5- Cut and remove the Infinity
Bag closing bands.
10- Pull the bag and place at
the edge the band to create
a new one. If necessary use
two bands.