DiamaPro Systems DEMON Manual del usuario - Página 3
Navegue en línea o descargue pdf Manual del usuario para Máquina de suelo DiamaPro Systems DEMON. DiamaPro Systems DEMON 9 páginas.
Imprimir página
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. This appliance is
equipped with a cord that has an equipment-grounding conductor
and grounding plug. The plug must be plugged into an appropriate
outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
FLOOR FINISHING MACHINES RATED LESS THAN 150 VOLTS
Improper connection of an equipment grounding conductor can
result in risk of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether the outlet
is properly grounded. Do not modify the plug provided with the
appliance. If it will not fit the outlet, have a proper outlet installed
by a qualified electrician. This appliance is for use on a nominal
120 volt circuit and has a grounding plug that looks like the plug
illustrated in Figure 1.
A temporary adapter which looks like the adapter illustrated in
Figure 2 may be used to connect this plug to a two pole recepta-
cle, as shown, if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded
outlet (Figure 1) can be installed by a qualified electrician. The
green colored rigid ear, lug, or the like extending from the adapter
must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must
be held in place by metal screw.
FOR FLOOR FINISHING MACHINES RATED 150-220 VOLTS:
If the machine is provided with an attachment plug cap as shown
in Figure 3, it is intended for use on a 240 volt (nominal) circuit. No
adapter is available for this cap.
DO NOT USE GROUNDING ADAPTERS ON
DEMONS IN CANADA. CHECK WITH CANADI-
AN CODE FOR PROPER EQUIPMENT USAGE.
IMPROPER USE OF GROUND ADAPTORS CAN
CAUSE SERIOUS INJURY, FIRE, OR BE FATAL.
CONTROLS
TO TURN THE MACHINE ON
The operating handle must be lowered and locked to the proper
operating position before switching the machine ON. Place both
hands firmly on the handle grips with your fingers around the
power triggers.
Do NOT apply pressure on the triggers before the safety switch
lock is disengaged.
Disengage the safety switch lock by pushing it forward with one
thumb. Then, while holding the safety switch lock in the disen-
gaged position, squeeze the power triggers toward the handle
grips and return your thumb to the handle grip.
To stop the machine, simply release the triggers. The safety
switch lock will automatically return to the engaged position.
GUIDELINES FOR OPERATION
Your Demon is a very sensitive, powerful unit. When in operation,
it should be guided gradually and smoothly without sudden or
rough motions. You will want to practice with your machine on a
smooth surface until you have experience in operating it.
• For ease of operation, always keep the brush or pad surface
level, balanced, and flat on the floor at all times.
• Always adjust the operating handle to a comfortable height at
which the brush or pad surface is balanced before starting the
machine. (See Handle Adjustment)
• Your Demon will operate differently on various surfaces. For
example, there will be much more resistance when the machine
is used on a rough surface, than when it is used on a smooth
surface. The operator should be prepared to adjust for these
differences.
• BEGIN OPERATING THE DEMON WITH THE PAD SURFACE
LEVEL, BALANCED AND FLAT ON THE FLOOR.
• To move the machine to the right, slowly apply slight upward
pressure on the handle.
• To move the machine to the left, slowly apply slight downward
pressure on the handle.
• To move the machine forward or backward, keep the brush or
pad flat on the floor and push or pull the machine in the desired
direction.
ADJUSTMENTS- HANDLE ADJUSTMENT
The handle can be adjusted to any desired work position by simply
pulling on the pull pin and move the handle to the desired position.
Firmly push the pull pin back into the adjustment holes. This will
lock the handle in position.
CORD STORAGE
When not in use, loosely coil the power cord and hang on the
handle.
CLEANUP & STORAGE
After being used, your Demon can be wiped clean with a soft
damp cloth and should be stored in a clean, dry place.
Pull Knob