Miller AMD-115G Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller AMD-115G. Miller AMD-115G 28 páginas.
También para Miller AMD-115G: Manual del usuario (24 páginas)

Imprimir página
Miller AMD-115G Manual del usuario

4-7. Plug Connections

4-8. Threading And Feeding Welding Wire

Tools Needed:
Pressure
Indicator
Scale
WIRE ADVANCE
Push wire thru guide up to drive rolls; continue to
hold welding wire. Press Wire Advance push button
until drive rolls grab wire. Adjust tension until wire
does not slip.
OM-179082 Page 14
1
POWER
ON
V
OFF
Weld Control
Welding Power Source
Set switches.
Pressure
Adjust
Press Wire Advance push button until
wire comes out of gun. Feed wire to
check drive roll pressure. Adjust knob
enough to prevent slipping.
1
2
Cord is available in 10 ft (3 m),
30 ft (9.1 m) or 50 ft (15.2 m) length.
3
To make connections, align key-
way, insert plug, and tighten
threaded collar.
2
3
Hold wire tightly to keep it
from unraveling.
Pull and hold wire; cut off end.
WOOD
Weld Control
Motor Control Cord (Not
Supplied)
Motor/Drive Assembly
Ref. 801 440 / Ref. 801 443-E
6 in
(150 mm)
Cut off wire. Close cover.
Ref. 804 391-B / Ref. 156 798