Miller ArcReach SuitCase Non-CE Manual del usuario - Página 19
Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller ArcReach SuitCase Non-CE. Miller ArcReach SuitCase Non-CE 48 páginas.
Imprimir página
4-1.
Serial Number And Rating Label Location
The serial number and rating information for this product is located on the back. Use rating label to determine input power requirements and/or
rated output. For future reference, write serial number in space provided on back cover of this manual.
4-2.
Software Licensing Agreement
The End User License Agreement and any third-party notices and terms and conditions pertaining to third-party software can be found at
https://www.millerwelds.com/eula
4-3.
Information About Default Weld Parameters And Settings
NOTICE – Each welding application is unique. Although certain Miller Electric products are designed to determine and default to certain typical
welding parameters and settings based upon specific and relatively limited application variables input by the end user, such default settings are
for reference purposes only; and final weld results can be affected by other variables and application-specific circumstances. The appropriate-
ness of all parameters and settings should be evaluated and modified by the end user as necessary based upon application-specific require-
ments. The end user is solely responsible for selection and coordination of appropriate equipment, adoption or adjustment of default weld
parameters and settings, and ultimate quality and durability of all resultant welds. Miller Electric expressly disclaims any and all implied warran-
ties including any implied warranty of fitness for a particular purpose.
4-4.
Specifications
Welding
Input Power
Power Source
Type
Constant Volt-
age (CV) Or
Open-Circuit/
Constant Cur-
Arc Voltage,14
rent (CC) DC
- 110Volts DC
Power Source
Only
4-5.
Environmental Specifications
A. IP Rating
B. Temperature Specifications
Operating Temperature Range*
14 to 104°F (-10 to 40°C)
*Output is derated at temperatures above 104°F (40°C).
4-6.
Wire Type, Size, And Feed Speed Capability Table
Motor Speed
Standard
*Rated speed range per IEC 60974-5
�
Complete Parts List is available at www.MillerWelds.com
SECTION 4 – SPECIFICATIONS
and are incorporated by reference herein.
Wire Feed
Wire Diameter
Speed
Range
Solid Wire
25 - 800 ipm
.023 - .052 in.
(0.64 - 20.3
(0.6 To 1.3
mpm)
mm)
Depending On
Flux Cored
Arc Voltage
.030 - 5/64 in.
(0.8 To 2 mm)
This equipment is designed for outdoor use.
Wire Type
All
Input Welding
Max. Wire
Circuit Rating
Spool Capacity
425 Amperes
At 60% Duty
Cycle
45 lb (20.4 kg)
12 in. (304 mm)
300 Amperes
At 100% Duty
Cycle
IP Rating
IP23
Storage/Transportation Temperature Range
-4 to 131°F (-20 to 55°C)
Wire Size
Solid Wire
.023 - .052 in.
(0.6 To 1.3 mm)
Flux Cored
.030 - 5/64 in.
(0.8 To 2 mm)
Overall
Weight
Dimensions
Height: 15-1/2 in.
(394 mm)
Width: 9 in.
34.5
(229 mm)
(15.6 kg)
Length:
21 in.(533 mm)
Rated Speed Range*
50 - 780 ipm
(1.3 - 19.8* mpm)
OM-278792 Page 13