Diamatic BG-300E Instrucciones de uso originales - Página 3

The Choice of Professionals ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶

It is important that all persons who are working or maintaining with this machine will read the manual carefully and

understand it fully. Keep this manual near the machine, so it can always be consulted.

Only authorized and trained personnel may operate this machine.

The BG-300E is an electric driven floor grinding machine for treating horizontal surfaces, especially for edge grinding.

▪

Closed circuit which is almost dust free, when connected to an appropriate Diamatic dust collector.

▪

Single-head grinding machine for processing work area edges and corners.

▪

To be used with standard cup wheel and Ring polishing pad 180 mm.

▪

Can do grinding and polishing both, Easy to transport, ready to work.

▪

The grinding arm is vertical adjustable and can be switched to the left or right.

▪

Grinding head is protected by a rubber buffer, Ergonomic design and user friendly control panel.

▪

Heavy duty professional equipment 230V, easy to plug in on every jobsite.

▪

Several optional grinding discs for an optimized use in every specific application.

Before operating the machine, the personnel must be familiar with the safety instructions given in this manual.

Keep this manual near to the machine, so it can always be consulted.

Safety precautions

▪

The surface to be treated must be swept clean to remove stones, screws etc.

▪

Never use the machine when the surface is not clear and if there is a risk of tripping.

▪

Make sure there is not any water on the surface to be treated.

▪

Remove any trailing electrical cables and or dust hoses from the surface to be treated

▪

Always use a dust collector

▪

Don't get disturbed during the activities.

▪

Safety regulations

▪

Persons who are not operating the machine must not be permitted to stay in the surrounding area of the

machine.

▪

Don't change anything on the machine. Use always cables which are approved and safety earthed (extend)

cables. The machine is always equipped with an earthed connection, do not change this and use always

earthed cables with an earthed plug.

▪

Connect main power supply cable to an installation with an earth leakage circuit breaker.

▪

Inspect and test the electrical components regularly. The electrical components have to satisfy to the

requirements which apply to these components.

▪

Always call a skilled electrician or your distributor when you have questions about the safety of the electrical

components.

̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶ ̶̶̶̶

www.diamatic.usa

P a g e

| 3