Aquant BWT Series Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Sistemas de filtración de agua Aquant BWT Series. Aquant BWT Series 14 páginas. Top-mount sand-filter for swimming pool

Imprimir página

What happens to the water in your pool?

This should be a question of prime consideration for all pool owners. In the

past some pools did not use filtering systems, the owner was faced with the

problem of refilling the pool with clean water when this became necessary.

Refilling the pool was laborious; meanwhile the owner had an unsanitary

pool with unpleasant bathing owing to the poor clarity of the water. Today

pool owners demand absolute hygiene, crystal clear water and economy of

effort. These objectives are achieved by effective filtration and chemical

treatment of the pool water.

After filling the pool with clean water in the summer, two basic factors can

take place due to the exposure of water to the sun and the air.

1.-Biological contamination. The water is contaminated by micro-organisms

which may be airborne or introduced by bathers.

These parasites reproduce rapidly in still warm water and algae may

form giving a greenish appearance to the pool water.

2.-Rainfall and wind may introduce dust, with leaves and seeds which

muddy and pollute the pool water.

These two factors generate in little time an unsanitary swimming pool

and unpleasant bathing.

Solutions to the problem:

1.-"CHEMICAL" TREATMENT

Maintain the correct level of sanitizer (chlorine, brome, oxygen...) in the

water to combat existing micro-organisms by its disinfecting action.

As chlorine is the more common method, it will be taken as the

reference point.

2.-"PHYSICAL" TREATMENT

Provide the pool with a filtration system (filter and pump) to remove

suspended particles from the water.

ENGLISH