Miller XMT 304 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller XMT 304. Miller XMT 304 40 páginas. 4-rack and 6-rack
También para Miller XMT 304: Manual del usuario (26 páginas), Manual del usuario (37 páginas)
Imprimir página
3-1. Additional Safety Symbols And Definitions
.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
When power is applied failed parts can explode or cause other parts to explode.
Always wear long sleeves and button your collar when servicing unit.
After taking proper precautions as shown, connect power to unit.
Disconnect input plug or power before working on machine.
V
>5min
Notes
SECTION 3 − DEFINITIONS
V
V
Hazardous voltage remains on input capacitors after power is turned
off. Do not touch fully charged capacitors. Always wait 5 minutes after
power is turned off before working on unit, AND check input capacitor
voltage, and be sure it is near 0 before touching any parts.
For single phase operation, insulate and isolate red conductor.
Include extra length in grounding conductor and connect grounding
conductor first. Connect black, white, and red wires (L1, L2, L3) to
line terminals.
Safe1 2012−05
Safe26 2012−05
Safe28 2012−05
Safe29 2012−05
Safe30 2012−05
Safe43 2017−04
Safe97 2012−05
OM-2208 Page 9