Miller XR - Pistol - Pro Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Sistema de soldadura Miller XR - Pistol - Pro. Miller XR - Pistol - Pro 40 páginas. Air and water-cooled gun
Imprimir página4-1. Gun Specifications
Model
Welding Output Range
XR-Pistol-Pro
200 A at 100% Duty Cycle
(Air-Cooled)
250 A at 60% Duty Cycle
15ft, 25ft or 35ft
(4.6m, 7.6m or 10.7m) guns
XR-Pistol-Pro
400 A at 100% Duty Cycle
(Water-Cooled)
15ft, 25ft or 35ft
(4.6m, 7.6m or 10.7m) guns
.
When using 1/16 in. (1.6 mm) wire, kit 230708 must be installed.
4-2. Duty Cycle And Overheating
100% Duty Cycle At 200 Amperes Using Argon
Continuous Welding
OM-254 824 Page 6
SECTION 4 − INTRODUCTION
Air-Cooled Models
Water-Cooled Models
100% Duty Cycle At 400 Amperes Using Argon
Continuous Welding
Electrode
Wire Feed
Wire Diameter
Speed Range
Capacity
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
.030 To 1/16 in.
70 To 900 ipm
(0.8 To 1.6 mm)
(1.8 To 23 mpm)
aluminum wire
60% Duty Cycle At 250 Amperes Using Argon
6 Minutes Welding
Net Weight
(Torch Only)
2.2 lb (1 kg)
(less cables)
2.4 lb (1.08 kg)
(less cables)
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
NOTICE − Exceeding duty cycle
can damage unit and void warranty.
4 Minutes Resting
sduty1 5/95