Miller Classic Series Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Accesorios de soldadura Miller Classic Series. Miller Classic Series 32 páginas. Welding helmet
También para Miller Classic Series: Manual de instrucciones (20 páginas)
Imprimir página
SECTION 5 − REPLACING THE LENS COVERS
5-1. Replacing Outside Lens Cover On Variable Shade And Standard Fixed
Shade Helmets
1
1
2
!
.
1
2
3
Remove lens cover frame by grasp-
ing the outside corners and pulling
the frame away from the helmet.
Remove lens cover and gasket from
the six-prong lens frame. Replace
lens cover and reinstall gasket and
lens in frame. Reinstall frame in hel-
met.
.
.
3
Be sure flat side of gasket
faces lens frame.
Never use the auto-darkening
lens without the inside and
outside lens covers properly
installed. Welding spatter will
damage the auto-darkening
lens and void the warranty.
See Section 5-5 for information
on replacing lens covers and
grinding shield on Fixed Shade
Flip-Up Helmets.
Outside Lens Cover Frame
Lens Cover
Gasket
Be sure the flat side of lens gas-
ket faces the six-prong lens
frame.
Be sure all six prongs of lens
frame are securely fastened in
slots in helmet.
OM-252052 Page 13
804 794