Miller M-10 Manual del usuario - Página 34

Navegue en línea o descargue pdf Manual del usuario para Accesorios de soldadura Miller M-10. Miller M-10 48 páginas. Air-cooled guns for gmaw and fcaw welding
También para Miller M-10: Manual del usuario (8 páginas)

Imprimir página
Miller M-10 Manual del usuario

8-5. Gun Movement During Welding

NOTE
1

8-6. Poor Weld Bead Characteristics

8-7. Good Weld Bead Characteristics

OM-1328 Page 30
Normally, a single stringer bead is satisfactory for most narrow groove weld joints;
however, for wide groove weld joints or bridging across gaps, a weave bead or
multiple stringer beads works better.
2
3
2
4
3
2
4
3
1
5
1
5
1
Stringer Bead − Steady
Movement Along Seam
2
Weave Bead − Side To Side
Movement Along Seam
3
Weave Patterns
Use weave patterns to cover a wide
area in one pass of the electrode.
S-0054-A
1
Large Spatter Deposits
2
Rough, Uneven Bead
3
Slight Crater During Welding
4
Bad Overlap
5
Poor Penetration
S-0053-A
1
Fine Spatter
2
Uniform Bead
3
Moderate Crater During
Welding
Weld a new bead or layer for each
1/8 in (3.2 mm) thickness in metals
being welded.
4
No Overlap
5
Good Penetration into Base
Metal
S-0052-B