Miller PAPR Manual - Página 19

Navegue en línea o descargue pdf Manual para Accesorios de soldadura Miller PAPR. Miller PAPR 40 páginas. Auto-darkening helmets

POWERED AIR PURIFYING RESPIRATOR

2-12. Maintenance And Storage

Replace damaged or dirty air filters. Do not wash filters, clean with compressed air, or

reuse dirty air filters.

Never use solvents or abrasive cleaning solutions to clean the respirator. Keep water and

other fluids out of blower assembly.

Maintain accurate records of filter replacement and respirator maintenance.

For best performance clean the equipment after each use. Use a soft cloth

dampened with a mild soap and water solution to wipe all external surfaces

clean. Allow to air dry.

Product usage, workplace contamination levels, and other factors affect the life

of the filter elements. Replace filter elements if air flow is reduced due to a dirty

filter (see Section 2-4) and according to the filter change schedule established

by your Safety Director and an Industrial Hygienist.

Inspect connecting hose and replace if damaged or if inside of tube is dirty.

If the respirator will not be used for an extended period, remove the filter and

battery and store them in a clean, dry, cool place free of solvent-based vapors.

Trouble

Blower does not supply air

to hood.

Blower cannot be turned

Off.

Blower runs for short time

even though battery is fully

charged.

Battery warning light is On

and alarm sounds.

Press On button.

Dead battery; recharge battery (see Section 2-2).

Verify battery is properly connected to blower body.

Remove blockage from blower outlet and hose.

Press Off button for two to three seconds.

Be sure battery is properly connected to battery charger.

Replace battery.

Replace charger.

Continue wearing the respirator and leave the contaminated area

immediately . Charge or replace the battery. The blower will oper-

ate for about 20 minutes after the warning light goes on.

Have Safety Director and an Industrial Hygienist determine if you

are using the proper equipment for the work environment.

Remedy

OM-235 936 Page 17