Miller WELD CRAFT WP-9P Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Accesorios de soldadura Miller WELD CRAFT WP-9P. Miller WELD CRAFT WP-9P 28 páginas.
Imprimir página
3-1. Specifications
Amperage Rating
Cooling Method
Tungsten Size
Cable Options
Dimensions
Amperage Rating
Cooling Method
Tungsten Size
Cable Options
Dimensions
3-2. Duty Cycle
0
10
Minutes
NOTICE − Exceeding rated amperage can damage torch and void warranty (see Section 3-1).
SECTION 3 − SPECIFICATIONS
A-125 (WP-9)
125 Amps W/Argon Gas At 60% Duty Cycle DCEN; 100 Amps W/Argon Gas At 60%duty Cycle ACHF
12-1/2 ft (3.8 m) or 25 ft (7.6 m) One-Piece Rubber
12-1/2 ft (3.8 m) or 25 ft (7.6 m) Two-Piece Rubber
Length: 7 in. (178 mm); Handle
Diameter: 7/8 in. (22 mm)
Weight: 4.2 oz (119 g)
A-125F (WP-9F) A-125FRH (WP-R9F)
125 Amps W/Argon Gas At 60% Duty Cycle DCEN; 100 Amps W/Argon Gas At 60%duty Cycle ACHF
12-1/2 ft (3.8 m) or 25 ft (7.6 m) One-Piece Rubber
12-1/2 ft (3.8 m) or 25 ft (7.6 m) Two-Piece Rubber
Length: 8.5 in. (216 mm); Handle
Diameter: 7/8 in. (22 mm)
Weight: 6.5 oz (184 g)
Definition
Duty Cycle is percentage of 10
minutes that torch can weld at
rated load without overheating.
Model
A-125V (WP-9V)
Air
.020 Thru 3/32 in. (0.5 Thru 2.4 mm)
Length: 7.5 in. (191 mm); Handle
Diameter: 7/8 in. (22 mm)
Weight: 5.1 oz (145 g)
Model
A-125FV (WP-9FV) A-125FVR (WP-R9FV)
Air
.020 Thru 3/32 in. (0.5 Thru 2.4 mm)
60% Duty Cycle At 125 Amperes Using Argon Gas w/DCEN
6 Minutes Welding
A-125P (WP-9P)
Length:6.25 in. (159 mm); Handle
Diameter: 7/8 in. (22 mm)
Weight: 3.3 oz (94 g)
Length: 9 in. (229 mm); Handle
Diameter: 7/8 in. (22 mm)
Weight: 7.6 oz (216 g)
60%dutycycle
4 Minutes Resting
OM-225 430 Page 7
sb1.5* 8/93