Miller 1025 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras Miller 1025. Miller 1025 13 páginas. Fluid head
Imprimir página
Maintenance
The Arrow 40/55 Fluid Head offers high quality surface
coatings, dust and moisture seals. Miller recommends
keeping the Fluid Head clean at all times by using soft brushes
and lint free cloth to wipe over the surfaces.
Do not immerse the Fluid Head in any liquid.
◗
Do not use stiff brushes, abrasives, harsh detergents and
◗
solvents.
Battery Replacement
The Arrow 40/55 Fluid Head uses a single GP23A type - 12
Volt battery for Illumination. Miller recommends the following
batteries to provide long life performance – Duracell MN21/23,
Eveready A23 or Vinnic L1028.
Using a Phillips Head #1 screw driver, remove the two
◗
RETAINING SCREWs, BATTERY DOOR and the old battery.
Insert the new battery as shown in figure 10.
◗
Insert the tab on the BATTERY DOOR into the body first then
◗
align the two screw holes and tighten the screws snugly.
Illumination Button
Fig. 10
Battery
9
Retaining Screw
Battery Door