Miller 1135 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Accesorios para cámaras Miller 1135. Miller 1135 13 páginas.

Maintenance

The Compass XV Fluid Head offers high quality surface coatings,

dust and moisture seals. Miller recommends keeping the Fluid

Head clean at all times by using soft brushes and lint free cloth

to wipe over the surfaces.

•

Do not immerse the Fluid Head in any liquid.

•

Do not use stiff brushes, abrasives, harsh detergents and

solvents.

The Compass XV Fluid Head uses a single 11A type - 6 Volt bat-

tery for Illumination. Miller recommends the following batteries

to provide long life performance – GP11A, Duracell MN11 or

Vinnic L1016.

1. Using a Phillips Head #1 screw driver, remove the

RETAINING SCREW and the BATTERY COVER.

2. Using a small flat screw driver remove the battery.

3. Align the new battery as shown on the back of the

BATTERY DOOR and place into the BATTERY HOUSING,

then push down the battery into place. A small flat screw

driver may be used to push down the battery into the

4. Align the BATTERY DOOR into the body then tighten the

screw lightly.

Battery

Battery Cover

Fig. 6