AquaOne COP-10000 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Bomba de agua AquaOne COP-10000. AquaOne COP-10000 11 páginas. Float aeration fountain pump
4. Note: When fixing, the motor part must be completely put into the water
bottom to avoid dry burning damage of the motor.
Cleaning/maintenance
Safety tips shall be observed and the water pump shall be
cleaned regularly to ensure its effective operation.
1.
Cut off the power
product out of the
2.
Remove the screws with a screwdriver, hold the main part of
the water pump to separate the main part of the water pump
from the
buoy.
3.
Rotate counterclockwise and remove the fixing
4.
Push the lock catch and rotate along the joint in a staggered
way to separate the water filter cover from the lower shell of
the main
body.
5.
Loosen the set screw to take out the rotor
6.
Use a soft brush to clean a part under running water.
7.
After
cleaning,
www.aquaristikwelt24.de
supply,
remove the
water.
assemble the products in
fixation,
and take the
frame.
assembly.
sequence.
By Aquaristikwelt24
S e i t e
| 8