ABB EVLunic V2 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Equipamiento industrial ABB EVLunic V2. ABB EVLunic V2 8 páginas. Pedestal – floor-mounted column

Imprimir página

Location requirements

General:

All of the location requirements for the charging station in the " Installation man-

ual" must be adhered to!

When mounting the floor-mounted columns in parking spaces or parking garages, appro-

priate anti-collision protection must be provided by the customer.

Concrete foundation:

The calculation, design and manufacture of the concrete founcation lies in the scope of

responsibility of the producer of the site.

A horizontal, level and sound foundation is required for installation.

To ensure safe and permanent anchoring, we recommend creating a concrete founda-

tion:

65cm (L) x 50cm (W), depth = min. frost limit but > 40cm, frost-free.

Concrete: C30/37 LP for XC4, XD1, XF4 or C25/30 LP for XC4, XD1, XF2

reinforced concrete: BSt 500 S; BSt 500 M

The base must permit the running off of any water that has entered the base.

All cables must be laid precisely in the centre of the concrete foundation from the base

and must have an excess length of approx. 1.5 m for the remaining installation activities.

During the production of the concrete foundation, the cables must be protected against

damage using appropriate measures (e.g., a protective tube). The protective tube must

have an excess length of approx. 25 cm above the concrete foundation.

Mounting the column on asphalt is not allowed!

Document: Rev. 1.00 / Document No.: 90333 │ Date 21.08.2018

WARNING!

Electrical hazard!

The V2/V3 floor-mounted column

must always be fitted with two

charging stations! There can be no

open cable openings in the column.