AquaOne HW-303B Manual de instrucciones - Página 11

Navegue en línea o descargue pdf Manual de instrucciones para Sistemas de filtración de agua AquaOne HW-303B. AquaOne HW-303B 15 páginas.

inlet and tighten the bolt. Fix the whole inlet assembly tot he tank according

to (PIC 6), and tighten the screws on the fixing base. And fix the pipe

to the overflow pipe for intake.

5. lnstall the Outlet assembly according to the parts list. lnstall the tube to the

inlet and tighten the bolt. Fix the outlet assembly to the tank according to (PIC

6), and tighten the screws on the fixing base.And fix the pipe to the overflow

pipe for return.

6.According to the diagram then press down the blue primer button on top of

the filter head this will prime the filter drawing water in through the hose.

Repeat this if necessary until all pipework is full with water,(PIC 4)

7.Things under the transparent cover are control switch of UV light and

indicator of the UV, When the electrical source switch on, you can see the

indicator light is shine which means the UV light works normally; lf the

indicator light is off which means the UV light tubes have broken, it is

necessary to change the UV light tube.(PIC 5)

The method of replacing the uv light tube

1. Open the filter head from the main body careffully, turn the head upside

down. Loosen the two screws around the quartz sleeve (PIC 1). Then

gently turn the quartz to release it fro, the filter head (PIC 2).

2. Pull the UV bulb out from the filter head to then replace (PIC3).

3. Finally install a new UV bulb, and assemblythe filter.

By Aquaristikwelt24

www.aquaristikwelt24.de

11 |

S e i t