Aquapeutics L528 Manual de instalación - Página 3
Navegue en línea o descargue pdf Manual de instalación para Cabinas de ducha Aquapeutics L528. Aquapeutics L528 5 páginas.
Imprimir páginaInstallation Steps
1. Install Tray
Move the Tray to the desired location, every ground foot nut should touch the
ground, Use the leveling feet to level the tub. Insert the drain pipe into the
drainage outlet. Drain should be a minimum of 2 inch dia. Refer to Pic 1
Clear Silicone
2.Install Mid back panel / Left Panel / Right Panel
( 1)Glue plastic washer to every mid back panel installation hole. Apply
silicone continually along the installation holes (As Pic2 )
Pic1
Glue down
Pic2
plastic
washer
3
Silicone
(2) line up the mid back panel holes to bathtub holes. Use M6x35 hexagon screws to
connect( As Pic 3) Leave all hardware loose until unit is completely assembled.
(3) Apply silicone along the mid back panel left edge. (As Pic 3)
(4)Glue plastic washer to the left panel installation hole. Apply silicone
continually along the installation holes . ( As Pic 2)
(5) Use M6x25 hexagon screws to connect the Left panel to mid back panel holes.
Use M6x35 hexagon screws to connect the Left panel to tray holes .(As Pic 4)
(6) Use the same method to install the Right Panel.(As Pic 5)
Left-Panel
M6x35mm
Plastic washer
Mid Back Panel
M6x35mm
Plastic washer
Pic3
Mid Back Panel
Left-Panel
Mid Back Panel
M6x25
Pic4
4
Right-Panel
Pic5