AQUAPHOR Crystal Solo B Manual - Página 2

Navegue en línea o descargue pdf Manual para Sistemas de filtración de agua AQUAPHOR Crystal Solo B. AQUAPHOR Crystal Solo B 4 páginas. Aquaphor crystal solo is an innovative single stage water filter for drinking water purification.

Imprimir página

INSTALLATION GUIDE

Warning! Before installing the filter,

supply pressure measurement is

needed. In case your incoming water

pressure exceeds 6.5 atm (96 psi)

you will have to install a pressure

regulator (not included in the set).

Find appropriate locations for the drinking

water faucet (1), the filter itself (2) and shut

off valve (fig.1).

NOTE: the tubing should be placed

easily and without fracture, and it

should be safe from damage and of

being pulled out of the fittings. The

filter should be kept away from

sources of heat (washing and

dishwashing machine, kitchen stove,

boiler, hot water pipes).

Warning! Use only the ceramic core

faucet (drinking water faucet) (1)

supplied. Aquaphor cannot guarantee

proper filter function in case you use

any other faucets. Do not use excessive

force to tighten; the manufacturer is not

responsible for installation or connection

issues. It is recommended to have the

filter installed by a professional.

Connecting to the water supply line

(fig. 1):

- shut off the cold water line and dump

excess pressure;

- make sure you have the o-ring in the

cap nut connection node (3);

- install shut off valve (3) to the water

supply line. Use thread seal tape if

necessary;

Fig. 1