AQUAPHOR DWM-101 Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Sistemas de filtración de agua AQUAPHOR DWM-101. AQUAPHOR DWM-101 16 páginas. Drinking water machine
Imprimir página
Drinking Water Machine Appliance
3
8
Figure 2: AQUAPHOR
1.
Replacement filter cartridge K5 (black tab) – (1) – Reduces suspended and particulate matter 5 microns*
or larger from the incoming water to protect Replacement filter cartridge K2 (2) and RO membrane (3) from
clogging.
2.
Replacement filter cartridge K2 (blue tab) – (2) – Reduces aesthetic chlorine and organic impurities
from the incoming water and protects the membrane from chlorine degradation. Reduces suspended and
particulate matter 3 microns* or larger. Removes heavy metals from the water.
3.
Reverse Osmosis (RO) Membrane (red tab) – (3) – The semi-permeable RO membrane separates the
majority of the remaining suspended solids and most of the dissolved solids from the water molecules.
These separated impurities are then washed down the drain.
4.
Replacement filter cartridge K7M (white tab) – (4) – Replacement filter cartridge K7M (4) is the final
stage of filtration. It filters the water and enriches it with useful minerals that improve taste and correct
drinking water salt balance.
5.
Spigot – A decorative spigot that can be turned on by slightly turning the handle for a low flow rate, or
turning the handle all the way on in the vertical position for the entire flow. The spout may be turned
clockwise or counterclockwise for convenient use.
6.
Appliance Shutoff Valve – Consists of the supply line to the spigot, blue supply line to the appliance,
and the incoming water supply line. Turn this lever to shut off the water to the appliance from the incoming
water supply.
7.
DWM Assembly – The DWM assembly contains a decorative cover that is attached by three plastic
fasteners, four twist-lock fittings for attaching the replaceable filter cartridges, storage tank that stores 1.3
gallons (5 L) of treated water that is available any timeand the valve assembly.
8.
Water Connections – Consists of three water connections. One connection provides incoming water to
the appliance, another connection carries treated water to the spigot, and the third connection carries
untreated water to the drain through air gap spigot.
* Per manufacturer testing.
6
7
2
1
4
Drinking Water Machine Appliance
®
10/9/2013
Drinking Water Machine
Installation Guide
Drinking Water Machine Filter Labels
Recommended Filter Replacement
The frequency in which the membrane and filters should be replaced depends upon the quality of the water
that enters the appliance. Contact your water treatment specialist for replacement filters and parts.
Note: The installation of the Drinking Water Machine appliance on a pre-treated water supply will greatly
increase the life of its filters.
Filter
Recommended Replacement
Replacement filter cartridge K5 (1)
Replacement filter cartridge K2 (2)
Membrane Cartridge (Housing with
preinstalled membrane element) (3)
Replacement filter cartridge K7M (4)
Warning: Shut off water to the appliance before beginning any maintenance.
Drinking Water Machine
Installation Guide
(months)
3–6
6
12
6
10/9/2013
7