AquaPix W5012 Splash Manual
Navegue en línea o descargue pdf Manual para Cámara digital AquaPix W5012 Splash. AquaPix W5012 Splash 3 páginas.
Imprimir página
Manual
IMPORTANT
To ensure optimal functioning of your Aquapix W5012 Splash, please
note the following important information:
1. For best results, we recommend using high quality Micro SD cards up to 32GB. Before
using the memory card for the first time, format it using the settings menu in your camera.
To avoid potential data errors, do not place Micro SD Cards near highly magnetic objects.
2. The recording time depends on the selected resolution. After reaching a max. video
recording time of approx. 29 minutes, the camera will stop recording automatically. It must
then be restarted manually.
3. Insert the batteries and memory card before using the camera underwater. Make sure
that all flaps and covers (battery and microphone compartment) are closed and that no
water can penetrate into the camera. If this happens, turn off the camera and do not use it
underwater. Never open the battery and microphone compartment under water. If moisture
appears on the lens during use, it may be leaking. Remove the batteries and the memory
card and return the camera to your dealer for repair. The camera is waterproof to a depth
of 3m. Please do not use the camera at greater depths. Especially when used in the water,
we recommend using the wrist strap on the wrist to avoid losing it.
4. Do not plug in the power cord with wet hands to avoid the risk of electric shock. Only
open the battery and microphone compartment with dry hands and ensure that no dirt can
get inside the camera when inserting, changing or removing the batteries or the SD card.
5. After application in water, turn off the camera, make sure the battery compartment is
tightly closed, and rinse the camera with clean water. Do not use soap or detergents, as
they could negatively affect the waterproofness of the camera. Allow the camera to dry
after rinsing.
6. If the camera becomes hot during use, switch it off immediately and remove the
batteries. Use the product only with the specified voltage. Otherwise, an electric shock or
fire may occur. If you are not going to use the device for a long time, please remove the
memory card and the batteries.
7. Always protect your camera from falls, blows and bumps. Do not try to disassemble the
camera. The camera contains high-voltage components, so there is a risk of electric shock
when disassembling. Keep a sufficient distance from objects that generate strong
magnetic fields or radio waves, such as electrical appliances, to prevent them from
damaging the product or affecting the sound and image quality.
8. Store the device cool (at room temperature) in a dry and dust-free location and never
expose the product to high temperatures or permanently to direct sunlight. In the unlikely
event of overheating, smoke or unpleasant odors coming out of the unit, remove the
batteries to avoid a fire. Return the camera to your dealer for repair.
1. Getting to know your camera
3m waterproof design
10.0 Mega pixels resolution sensor
Digital still camera
Digital video recorder
Built-in flash light
4x digital zoom
2.4 " TFT color display
Micro SD card support
2 x AAA alkaline batteries
2. Functional parts
Press this button to take photographs or to start /stop recording
1
Shutter
a video clip, or to confirm changes in menu mode.
Press this button to switch on and press it for at least 2 seconds to
Power on/off
2
shut off. Or press it to hide/display the status icon on the LCD
button
screen.
3
Strap hook
Hook for attaching the wrist strap to the camera.
Use the built-in flash to give the subject extra lighting if it is in dark
4
Flash light
surrounding（the best flash distance is recommended within 1.5m).
Records the image to be taken.
5
Lens
Note: Keep the lens clean. Dirt and fingerprints will affect the quality
of the picture.
6
Busy indicator
When the indicator is blinking, the camera is busy.
Macro mode: Select this mode to take close-up photographs
(distance 11cm - 18cm).
7
Macro switch
Normal mode: Select this mode to take photographs from
0.5m - infinity.
8
LCD screen
Display photographs, video clips, camera setting and menu.
In Preview mode: press this button to Tele (zoom in);
In Menu mode: press this button to up the selection bar.
9
Up/Tele
In Playback mode（photo）: press this button to zoom in.
In playback (Video playing) mode: press it to start/pause the video.
In Preview mode: press this button to Wide (zoom out);
In Menu mode: press this button to down the selection bar.
10
Down/Wide
In Playback mode（photo）: press this button to zoom out.
In Playback mode: press this button to get into the thumbnail mode
In Menu mode: press this button for the left selection;
In Playback mode: press this button to the previous one;
In Photo infinite Preview mode:
press this button to switch Flash modes; (the flash light cannot be
11
Left / Flash light
used in macro mode）
In Photo (zoom in) Playback mode : press it to move to the left area
of the photo.
In playback (Video playing) mode: press it to fast rewind.
Press this button to get into Playback mode;
In Playback mode: press this button to the next one;
In Menu mode: press this button for the right selection;
12
Right / Playback
In Photo (zoom in) Playback mode: press it to move to the right area
of the photo.
In playback (Video playing) mode: press it to fast forward.
Press this button to switch between movie and still capture mode;
In Playback mode：press this button to exit.
13
Mode
In Photo (zoom in) Playback mode：press it to move to the up area
of the photo. In playback (Video playing) mode: press it to stop the
video.
In Preview mode: press it to enter the settings Menus.
In Playback mode:
Press it for a short time to enter "Delete single/ all files" mode;
14
Menu / Delete
Press it for a long time to enter file compiling and system setting
menu. In Photo (zoom in) Playback mode: press it to move to the
down area of the photo.
15
Tripod connector
To fix the camera on tripod.
Micro SD card
16
Micro SD card storage location.
slot
Via this connection, you can download photographs and video clips
17
USB interface
to a computer.
Battery
18
Compartment for 2 x AAA alkaline batteries
compartment
3. Explanation of the status icons
Item
Function
Photographs mode.
1
Mode selected
Videos mode.
Force flash: The flash is on in any
environment.
2
Flash indicator
Auto flash: The camera determines if
the flash should be used or not.
No flash: The flash is turned off.
Normal/Macro
Normal mode (0.5m – infinity).
3
mode indicator
Macro mode (11cm – 18cm).
4
Self-timer
Shows selected Self-timer setting
16M = 4608x3456; 10M = 3648x2736;;
5
Selected resolution
5M = 2592x1944;
VGA = 640x480
Super fine.
6
Picture quality
Fine.
Normal.
The batteries are full.
7
Battery indicator
The batteries are empty.
8
Zoom indicator
Shows the zoom ratio in preview mode
The micro SD card
The micro SD card is inserted and will be used
9
indication
as storage for PHOTO and VIDEO
10
White balance
Shows the selected white balance mode
Photo mode: No. of pictures that can be taken.
11
Photo/Video counter
Video mode: Recording time in second..
4. Details for camera setting
16M pixel resolution
10.0M pixel resolution
Resolution
5.0M pixel resolution
3.0M pixel resolution
VGA resolution
Quality
Super Fine/Fine/Normal
Metering
Center/Multi/Spot
Auto
Daylight
Cloudy
White balance
Tungsten
Fluorescent
ISO
Auto/100/200/400/800
±2.0, ±1.7, ±1.3, ±1.0, ±0.7,
Exposure
±0.3, 0
Self Timer
On/Off
Sharpness
Hard/ Normal/ Soft
Normal/ B&W/ Sepia/
Negative/ Lomo/ Pencil
Effect (Preview)
Sketch/ Red/ Green/ Blue/
Vivid
Description
3M = 2048x1536;
4608x3456
3648x2736;
2592x1944
2048 x 1536
640 x 480
Picture quality setting
Metering setting
Automatic white balance
White balance selected for
daylight surrounding
White balance selected for cloudy
surrounding
White balance selected for
tungsten lighting
White balance selected for
fluorescent surrounding
Sensitivity selection
Exposure setting
Self timer setting
Sharpness setting
Effect setting