BURL B2 Bomber ADC Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Equipo de música BURL B2 Bomber ADC. BURL B2 Bomber ADC 17 páginas. B2 bomber adc b2 bomber dac with dante

BURL B2 Bomber ADC Manual del usuario
1. Download and install "Dante Controller" and purchase "Dante Virtual Soundcard," or
Dante PCIe Card.
Dante Virtual Soundcard -Go to www.audinate.com/products/software
Dante PCIe Card -Focusrite Rednet PCIe card recommended
2. Using Cat6 Ethernet cable, connect the B2 Bomber to a gigabit switch. Connect your
DAW computer to the same switch with CAT6 cable. For best results, start by removing
all other connections to the switch. Dante should be on it's own network.
3. Start by setting the B2 to Internal Clock, and desired sample rate (we recommend 96k).
4. Open "Dante Virtual Soundcard" (Figure 7)
- Click START to turn on Dante Virtual Soundcard.
Figure 7
5. Open "Dante Controller"
6. Click on ROUTING tab (Figure 8, page 9)
Click on the corresponding coordinates to enable device, as per Figure 8.
Note: Transmitters refers to signal coming from ADC to Dante card.
Receivers refers to Dante card sending signal to DAC.
DANTE QUICK START
9