Aquaport AQP-IM12C Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Fabricador de hielo Aquaport AQP-IM12C. Aquaport AQP-IM12C 12 páginas. Deluxe collection

TROUBLE SHOOTING

BEFORE YOU CALL FOR SERVICE PLEASE REVIEW THE TROUBLE SHOOTING TIPS FIRST.

Problem

The compressor works

abnormally with a buzzing noise

REFILL WATER indicator

light is on

Ice making cycle is normal

but no ice formed

The ICE FULL and REFILL

WATER light are both

illuminated

Machine keeps running,

but the water is warmer

than the normal water

Possible Causes

The voltage is lower than recommended

There is insufficient water in the water

reservoir

The water pump is full of air

Room temperature or water temperature in

inner tank is too high

Refrigerant in cooling system has leaked

Pipe in cooling system is blocked

Water tray is blocked by ice cube

The magnetic valve is broken

What To Do

Stop the Ice maker and do not restart until the voltage is normal

Press the STOP button, fill with water, wait 3 minutes and

press the start button to restart. When the water has

reached the fill line the ice maker will restart automatically

Remove the silicon stopper in the bottom of the reservoir

and let several drops of water run out

The room temperature should be 10-35°C, water

temperature should be 8-32°C

Contact Customer Service

Press the STOP button, turn off power supply and

disconnect the power cord. Clear the ice cube from under

the ice shovel. Reconnect power to the unit then press the

START button, within two minutes the machine will restart

automatically.

Contact Customer Service

INSTALLATION AND OPERATING INSTRUCTIONS 7