Burley 170 Manual de instrucciones de instalación y funcionamiento - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Chimenea de interior Burley 170. Burley 170 8 páginas.

Trouble shooting

If you suspect the fire is not operating correctly carry out the following procedure:

1) Plug the fire directly into a 13 amp wall socket, not into an extension lead or a fused spur. Check the socket

works and is suitable for a high powered appliance by first plugging in a kettle and boiling some water (if the circuit

is tripping a small appliance such as a table lamp, it will not trip the mains fuse).

2) Ensure the lead is firmly plugged into the fire. Turn the manual master switch on, this is behind the ashpan at the

front of the appliance. If this switch is not on, the fire will NOT work.

3) From a distance of 1 meter (3 feet) directly in front of the fire, press the right-hand button on the remote control.

The light should come on.

4) Press the remote again and the flame effect should start.

5) Turn the thermostat all the way up clockwise to maximum, press the remote control again and the fan heater

should come on.

Diagnosis:

Light and flame do not come on but heater does. The light bulbs need replacing.

Light and heater work but no flame effect. Unplug the fire, remove the log / coal effect and the Perspex, and check if

anything is obstructing the flame effect.

Light and flame work but no heat.

If the room is very warm the thermostat will not trip in, to activate the heater. Try again when the room is

cold

II.

The heater has a thermal cut out to prevent over-heating, for this to reset, the fire must be completely

unplugged from the mains and left for 10 minutes. It is most likely that it has tripped due to a build-up of

dust and fluff. With the fire unplugged gently brush the heater fan through the air inlet grill, once this has

been done, vacuum the grill area to remove any dust or fluff.

III.

Turn the thermostat up fully, see Thermostat in the instructions.

IV.

If nothing happens you will need to purchase a new battery for the remote control ensuring it is fitted

correctly.

WEEE：

Do not

dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local

government for information regarding the collection systems available.

Warranty

Your guarantee is with the retailer from whom you purchased the appliance if necessary they will contact Burley

Appliances. The guarantee period is one year from the date of purchase. During this period, if the fault is due to a