Burley cargo Manual de instrucciones y seguridad - Página 4

Navegue en línea o descargue pdf Manual de instrucciones y seguridad para Vehículo utilitario Burley cargo. Burley cargo 12 páginas. Сargo

Imprimir página

WARNING

TRAILERS CAN TIP OVER, CAUSING DAMAGE TO TRAILER AND

SERIOUS INJURY TO CYCLIST. AVOID CAUSES OF TIP OVER,

ESPECIALLY:

• HITTING POTHOLES, CURBS, OTHER ROAD OBSTRUCTIONS

• TAKING TURNS TOO FAST

• SUDDEN SWERVING

• IMPROPER WHEEL INSTALLATION OR TIRE INFLATION

Attaching Wheels

1. Insert wheel axle assembly completely into trailer

axle.

FIGURE 1

2. Close quick release lever, with lever aimed at trailer rear.

A properly adjusted quick release lever should leave an

imprint on your palm when the lever is rotated to the

closed position.

FIGURE 2

3. Verify that tires are inflated to pressure marked on tire

side wall.

4. To remove wheel from trailer axle, open quick

release lever.

WARNING

MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL

SHAFT FULLY INSERTED INTO HOLLOW AXLE. YOU SHOULD NOT

BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY INSTALLED

WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR

SERIOUS INJURY.

Installing Side Rails

Nomad:

1. On trailer sides, flip the four C-shaped side panel

hold-downs to outside of trailer frame.

2. Slide vertical side rails down over side rail guides on

trailer sides, with narrower end of side panels to the rear

and "Burley" logo facing outward.

3. Snap all four side panel hold-downs over side panel

tubing.

PHOTO 4

B U R L E Y N O M A D A N D F L A T B E D O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L

PHOTO 1

PHOTOS 1 & 3

FIGURE 1:

Quick release lever in unlocked

"open" position (Top View)

Side Rail

Side Rail Guide

C-Shaped Hold-down

PHOTO 1

PHOTO 2:

Hold-down locked over side panel tubing

Trailer

Rear

FIGURE 2:

Quick release lever in locked

"closed" position (Top View)