Burlington T30 CHR Montaje - Página 8

Navegue en línea o descargue pdf Montaje para Productos de fontanería Burlington T30 CHR. Burlington T30 CHR 9 páginas. High level flush pipe kit

1: Flush Valve scale and adjustment setting

Note:

The Flush Valve could be adjusted to reach a full flushing volume of 6.0 litres, and a half flushing volume of 3.0 litres.

Please see below diagram A for the recommended settings and adjust method for the flush valve.

Half Flush Float : should be set on the 4.5 mark

Half Flush Adjustor : should be set at '1' mark

Full Flush Adjustor : should be set on the '2.5' mark

2: Flush Valve installation

Screw off the fixing nut and discard.

3: Flush Valve trouble shooting

Problem

Leakage

No flush, low flush or half flush volume

Half flush water level is too high or too low.

Flush Valve Installation And Problem Solving

Fix the flush valve body onto the flush valve seat.

1.Incorrect installation.

2.Flush valve seat does not fit flush valve body.

3.Flush valve body is stuck.

Cable is distorted.

Water level is adjusted incorrectly.

Use the brass nut from High Level Flush Pipe

Kit to fix the Flush Valve onto the cistern.

4 - 5

l o

t u

o i

1.Install again according to the correct installation procedure.

2.Install again.

3.Disconnet and wash flush valve body.

Remove kinks or sharp bends in the cable.

Adjust water level.