Diamond SGF 800 Instrucciones de uso e instalación - Página 5

Navegue en línea o descargue pdf Instrucciones de uso e instalación para Equipamiento alimentario comercial Diamond SGF 800. Diamond SGF 800 16 páginas. Gas salamanders

Imprimir página

Power control knob + on/off

5. FUNCTIONING / HANDLING

a) Installation/Assembly:

- Unpack carefully the machine from its packaging.

- Place the device on a plane and heatproof surface in a well ventilated place.

- Never place the device near a wall or near a partition makes of combustible materi-

als even if it is very well isolated.

- A distance of minimum 40 cm with the partition or the wall is necessary.

- Remove the protective film from the top, the rear, the sides and the tray.

- Unlock the movable top by unscrewing the screw located on the back of the ma-

chine thanks to a 10 pipe key (models SGM 600 and SGM 800).

CAUTION :

During use: never place the machine on surfaces or near walls, partitions or

kitchen furniture and similar— except if they are made with a non combustible

material or recovered with non combustible thermic insulation, and pay atten-

tion to fire preventions rules.

b) First starting:

During the first use, warm your machine up outside during about 30 min to evacuate

residual smokes of manufacturing oil from the metallic parts. This may emit a slight

smell for a few moments.

Pilot light